Unication Messenger m90 Instrukcja Użytkownika Pobierz pdf (Strona 6)

2. Link a Send MB to this message by clicking on the Send button. The Select Operand and Address box

opens.

3. Select an MB, then press OK. The MB's number and description appear in the Send fields.

4. Repeat Steps 2 & 3 to link a Receive MB.

Note that a message does not need to be linked to both a Send and Receive MB.

5. Link the GSM cell phone numbers to this message by checking the boxes of the desired numbers. You

can also select Last Received Phone Number. This will cause this SMs message to be sent to the origin

of the last SMS message received by the M90.

6. Note that you cannot edit the SMS phone book while you are configuring SMS Message

7. When you have finished, click Exit.

In the message below, the Send MB is 11, the Receive MB is 12, and the checked box under P means

that phone numbers have been linked to this message. ACK has also been selected.

ACK-Acknowledge message

This feature allows a cell phone user to check if the M90 has received a particular message.

Configuring SMS messaging features

In order to use the SMS feature, your M90 must be connected to a GSM modem. To enable the M90 to

use the GSM modem, select the 'Use SMS Messaging' option shown below. This causes the M90 to

turn on SB 180, Initialize GSM Modem, at power-up.

The M90's embedded GSM modem settings are: 19200, 8 data bits, no parity, 1 stop bit. You may

need to manually change your modem's communication settings to match these parameters.

If your GSM modem requires a PIN code to connect to a GSM network, enter it as shown below.

1 2 3 4 5 6 7 8 9 10

Brak uwag

Unication Messenger m90 Instrukcja Użytkownika Strona 6